Cisco TelePresence MX700 and MX800
Placing a call
You can use the Call Control page to place a call.
Even if the web interface is used to initiate the call,
it is the video system (display, microphones and
loudspeakers) that is used for the call; it is not the PC
running the web interface.
You can call someone either by choosing a contact name in
the Local, Directory or Recents lists, or by typing a complete
URI or number in the Search or Dial field. Then click
the associated contact card.
Searching the contact lists
Enter one or more characters in the Search or Dial field.
Matching entries from the Local, Directory and Recents lists
will be listed as you type.
Select the correct entry in the list and click Call.
Calling more than one
A point-to-point video call (a call involving two parties only)
may be expanded to include more participants.
If your system supports the optional built-in MultiSite feature,
up to five participants, yourself included, can join the video
Follow the same procedure to call the next conference
participant as you did when calling the first participant.
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.
Navigate to: Call Control
Click a contact name, either in the
Local, Directory or Recents lists.
Alternatively, enter the complete URI
or number in the Search and Dial
field. Then click the
appears next to the URI or number.
in the contact card.
Holding and resuming
Ending a call
If you want to terminate a
call or conference, click
to the participant's name
all. Confirm your choice in
to put him on hold.
the dialog that appears.
To resume the call,
To disconnect just one
participant in a conference,
that is present when a
participant is on hold.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
button for that