Download  Print this page

Deleting Trust Lists (cucm Only) - Cisco TelePresence MX700 Administrator's Manual

Hide thumbs

Advertisement

Cisco TelePresence MX700 and MX800
Administrator Guide
Contents
Introduction
Web interface
Web interface
System settings
Setting passwords
Appendices

Deleting trust lists (CUCM only)

Navigate to: Configuration > Security: CUCM tab
The information on this page is only relevant for
video systems that are registered to a Cisco Unified
Communications Manager (CUCM).
The web interface can be used to delete existing trust lists
(CTL and ITL) that are stored on the video system. Normally,
you will not delete the old CTL and ITL files, but there are a
few cases when you will need to delete them.
The trust lists' fingerprints and an overview of the certificates
in the lists are displayed on the web page. This information
can be useful for troubleshooting.
For more information about CUCM and trust lists, read the
Administering TC Endpoints on CUCM guide available on the
Cisco web site.
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
45

Advertisement

Table of Contents

   Also See for Cisco TelePresence MX700

This manual is also suitable for:

Telepresence mx800

Comments to this Manuals

Symbols: 0
Latest comments: