Download  Print this page

Starting Extended Logging - Cisco TelePresence MX700 Administrator's Manual

Hide thumbs

Advertisement

Cisco TelePresence MX700 and MX800
Contents

Starting extended logging

Extended logging mode may be switched on to help diagnose
network issues and problems during call setup. While in this
mode more information is stored in the log files.
Note that extended logging uses more of your video system's
resources, and may cause your video system to under-
perform. You should only use extended logging mode when
troubleshooting an issue.
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.
Introduction
Web interface
Web interface
Navigate to: Diagnostics > Log Files
System settings
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
48
Administrator Guide
Setting passwords
Appendices
Start extended logging
Click
Start extended
logging.
Extended logging lasts for 10 minutes. You can stop
the extended logging before it times out by clicking
the
Stop extended logging
button that appears when
extended logging is on.
As default, the network traffic is not captured. Use the
drop down menu if you want to include a full or partial
capture of the network traffic.

Advertisement

Table of Contents

   Also See for Cisco TelePresence MX700

This manual is also suitable for:

Telepresence mx800

Comments to this Manuals

Symbols: 0
Latest comments: