Download  Print this page

Advertisement

Cisco TelePresence MX700 and MX800
Contents

Capturing screenshots

You can capture screenshots both of a Touch controller that is
connected to the video system, and of the on-screen display
(menus, indicators and messages on the main display).
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.
Introduction
Web interface
Web interface
Navigate to: Diagnostics > User Interface Screenshots
Capture a screenshot
Click
Take screenshot of Touch Panel
capture a screenshot of the Touch controller,
or click
Take screenshot of OSD
screenshot of the on-screen display.
The screenshot will display in the area below
the buttons. Note that it can take up to
30 seconds before the screenshot is ready.
All captured snapshots are included in the list
above the buttons. Click the screenshot ID to
display the image.
System settings
to
to capture a
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
49
Administrator Guide
Setting passwords
Appendices
Deleting screenshots
If you want to delete all screenshots,
click
Remove
all.
To delete just one screenshot, click
×
the
button for that screenshot.

Advertisement

Table of Contents

   Also See for Cisco TelePresence MX700

This manual is also suitable for:

Telepresence mx800

Comments to this Manuals

Symbols: 0
Latest comments: