Placing A Call - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

Placing a call

You can use the Call Control page of the web interface to
initiate a call.
Even if the web interface is used to initiate the call
it is the video system (display, microphones and
loudspeakers) that is used for the call; it is not the PC
running the web interface.
Calling
You can call someone either by choosing a contact name in
the Local phone book or Directory, or by typing a complete
URI or number in the Search and Dial field. Then click
the associated contact card.
Searching the contact lists
Enter one or more characters in the Search or Dial field.
Matching entries from both the Local phone book and the
Directory will be listed as you type.
Select the entry in the phone book or directory before you
click Call.
Calling more than one
A point-to-point video call (a call involving two parties only)
may be expanded to include more participants.
If your system supports the optional built-in MultiSite feature,
up to four participants, yourself included, can join the video
call. The call will then become a video conference.
One additional participant can join on audio-only.
Follow the same procedure to call the next conference
participant as you did when calling the first participant.
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface Web interface
Navigate to: Call Control > Call Control
Call in
Click a contact name, either in the
Local phone book or in the Directory.
Then click
Alternatively, enter the complete URI
or number in the Search and Dial field.
Then click the
System settings
Calling someone
Call in the contact card.
Call button that appears
next to the URI or number.
15
Setting passwords
Holding and resuming Ending a call
To disconnect just one
Use the button next
participant in a call, click
to the participant's name
the
to put him on hold.
participant.
To resume the call,
Click the
use the button
terminate the entire call.
that appears for the
participant on hold.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
button for that
End all button to