Cisco TelePresence MX700 Administrator's Manual page 41

Cisco TelePresence MX700 and MX800
Contents
Managing the list of trusted
certificate authorities
(page 2 of 2)
As from software version TC7.2, the signature of an
audit server is verified using the same CA list as other
servers/clients.
Setting up secure audit logging
Audit logging records all sign in activity and configuration
changes on your video system.
Audit logging is disabled by default, but you can enable it
using the Security > Audit > Logging > Mode
In ExternalSecure audit logging mode the video system
sends encrypted audit logs to an external audit server
(syslog server), which identity must be verified by a signed
certificate.
If the audit server cannot be authenticated, the logs will not
be sent.
Always upload the list of trusted certificate authorities
before enabling secure audit logging.
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Configuration > Security: CAs tab / Configuration > System Configuration
setting.
System settings
iii
ii
i
41
Administrator Guide
Setting passwords
Enable secure audit logging
i. Go to the
Configuration
choose the
category.
ii. Enter the
the audit server. If
you choose Manual
PortAssignment,
must also enter a
number for the audit
server. Click
changes to take effect.
iii. Choose ExternalSecure
from the
drop-down list. Click
Save
take effect.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Appendices
System
page and
Security
Address of
you
Port
Save for the
Logging Mode
for the change to