How To Enable Native Interlaced Mode (Black Line Insertion); How To Change The Aspect Ratio - Barco RHDM-2301 User Manual

How to
3.8 How to enable native interlaced mode (black line
insertion)
Set the Deinterlace mode to "black line insertion":
• Go to the OSD menu by pressing (
• Move with the trackball to highlight the "Input settings" in the main menu
• Press ( )
• Move with the trackball to the "Deinterlace mode" setting of the appropriate window
• Press ( )
• Move with the trackball (up or down) to select "black line insertion" mode
• Press ( )

3.9 How to change the aspect ratio

Figure 15: Location of the button to change the aspect ratio
• Press (
applied instantaneously to the window.
or
• Press ( )
• Select the aspect ratio using the trackball.
• Press ( )
:
NOTE
The aspect ratio can be set for each window separately.
30 _____________________________________________________Barco - RHDM-2301 - User manual
or ( ) to open the "Input settings menu"
or ( ) to select the mode
or ( ) to confirm the "black line insertion" mode
Track ball
) to toggle between all possible aspect ratios. The aspect ratio is
to open the aspect ratio mode selection toolbox.
or ( ) to confirm the selection.
)