Barco RHDM-2301 User Manual page 43

• Image adjustment bar visible: value that corresponds to the rotary knob is changed
Turning clockwise = increasing value
Turning counterclockwise = decreasing value
Pressing the rotary knob:
• Image adjustment bar not visible: image adjustment bar is shown
• Image adjustment bar visible: value that corresponds to the rotary knob is set to its
default and calibrated value.
4.1.4.5 Trackball
The trackball allows the operator to move the pointer or navigate in the menus.
4.1.4.6 LEDs
Power on and input calibrated:
• The power button is lit green.
• All other buttons are lit white.
Standby:
• The power button is lit orange.
• All other buttons are lit white.
Power on and input not calibrated:
• The power button is lit green.
• The calibration button is lit orange.
• The LED above the image adjustment knob is lit orange when the setting is out of
the calibrated range for the selected input. When the calibration is performed, by
pressing the calibration button, the orange lights disappear and the calibration but-
ton is lit green.
• All other buttons are lit white.
:
NOTE
The lights behind the buttons go out 10 seconds after all activity on the control panel has stopped. The
buttons remain active when the lights after the buttons are out. Pressing a darkened button will
execute the function represented by the button immediately. Only the power button is functional when
the display unit is in hard standby.
Barco - RHDM-2301 - User manual ____________________________________________________ 43
Full functionality description