Barco RHDM-2301 User Manual page 59

4.2.5.8 Safe area marker settings button
Function
Input graphics settings
:
NOTE
The values shown at "Hor" and "Ver" indicate the amount of percent that the area is reduced with
respect to the ARM or image borders at one side of the screen. In total, the horizontal and the vertical
size of the image is reduced by 2 times the value shown at "Hor" and "Ver" respectively.
Barco - RHDM-2301 - User manual ____________________________________________________ 59
Description
Toggle area markers on/off. The area markers indi-
cate the safe area on the screen.
Safe area settings toolbox appears:
• Safe Areas Enabled: enable/disable all settings
• Crosshairs Enabled: enable crosshair centered on the
screen
Aspect Ratio Marker (ARM)
• Radio buttons (16:9, 4:3, 14:9 and custom): select
the aspect ratio marker according to a standard or cus-
tom ratio.
• Aspect ratio: Define a custom aspect ratio marker
Action Safe Area
• Relative to (ARM/Image borders): define the action
safe area relative to the aspect ratio markers or the im-
age borders
• Standard (EBU, SMPTE, ITU and custom): select the
action safe area according to a standard or custom de-
fined ratio.
• Hor. and Ver. define the action safe area relative to the
aspect ratio markers or image borders as a decrease ex-
pressed in percent.
Graphics Safe Area
• Relative to (ARM/Image borders): define the graphics
safe area relative to the aspect ratio markers or the im-
age borders
• Standard (EBU, SMPTE, ITU and custom): select the
graphics safe area according to a standard or custom de-
fined ratio.
• Hor. and Ver. define the graphics safe area relative to
the aspect ratio markers or image borders as a decrease
expressed in percent.
Settings of the hairlines and shaded areas
HairLine: enable/disable hairlines to define safe area
• Width of the hairline, expressed in number of pixels
• Color of the hairline
Shadow: enable/ disable shadows to define safe area
• Color of the shadow
Full functionality description