Barco RHDM-2301 User Manual page 37

• When the valid user name and password are entered, the Admin section will be
opened in the webpage.
• Click on "Upgrade firmware"
• Click on "Browse" and select the debian software upload package (xxx.deb) that
needs to be uploaded into the display unit.
• Start the upload of the software by pressing "Update". The upload of new software
will start immediately. The pc will show the progress of the software upload while
the display unit will show the following warning message on the screen:
• After the software upload, the display unit will reboot automatically and will start-up
using the newly uploaded software.
:
IMPORTANT
If the upload of the new software would fail or would be interrupted, the display unit will reboot into
the failsafe mode. The software version of the failsafe mode is the most recent software version that
was uploaded successfully.
Barco - RHDM-2301 - User manual ____________________________________________________ 37
How to