Technical Specifications Notice; Federal Communication Commission (Fcc) Notice; Warranty - Barco RHDM-2301 User Manual

Introduction

1.6.4 Technical specifications notice

The technical specifications mentioned in this manual shall under no circumstances be
used as proof or item of evidence.
Only the technical specifications defined in the Barco technical specifications document
(which is not part of this manual) can be used as a base for contract negotiations.

1.6.5 Federal Communication Commission (FCC) notice

This equipment has been tested and found to comply with the limits of an FCC class (refer
to the technical specifications of the specific unit for more details about the corresponding
class). These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.

1.6.6 Warranty

During the warranty period, Barco n.v. will do all repairs free of charge
(material and labor). The faulty parts or units have to be shipped freight prepaid
to a Barco n.v. regional service center. Barco n.v. will pay the freight charges
when the repaired parts are shipped back to the customer's site.
Damage of equipment due to improper use or negligence of the safety
precautions incorporated in this manual are not covered by this warranty.
:
IMPORTANT
Opening the cover of the display unit voids the warranty.
The warranty does not include the following:
• Any hardware or software item procured from a source other than Barco n.v. or their
official agent or distributor and integrated by Customer or a third party into Barco
n.v. supplied equipment.
• Any host or system configuration not explicitly supported by Barco n.v..
• Consumables such as projector lamps, dust filters, ...
• All software installed on the system, whether they are acquired from Barco n.v. or a
third party. An exception is made for software delivered by Barco n.v. that would
prove to be a cause for the malfunctioning of the hardware covered under this
Agreement.
• If any payment remains outstanding from the Purchaser to the Seller.
• Normal wear and tear, use under circumstances exceeding specifications, abuse,
unauthorized repair or alteration, lack of proper maintenance.
• In the particular case of LCD displays, to the case of image retention phenomena
(shadows, dark lines and other image artifacts), that may result from a usage out-
side of the specification.
• Any failures resulting from an accident, negligence (such as but not limited to
removing or deleting system files & licensed software product files), misuse, circuit
10 _____________________________________________________Barco - RHDM-2301 - User manual