Barco RHDM-2301 User Manual page 140

Addendum
To mount the control panel to the display unit:
• Place the display unit with the front side on a horizontal, flat and stable table, cov-
ered with bubble wrap or a similar protective material.
• Remove the Barco stand (if necessary)
• Fix the 4 screws to mount the control panel to the bottom of the display unit.
• Connect the necessary cables between the control panel to the display unit.
• Mount the Barco stand (if necessary)
Figure 70: Bottom view of the control panel and the display unit
140 ____________________________________________________Barco - RHDM-2301 - User manual