Barco RHDM-2301 User Manual page 77

4.3.5.3 Dual link 1-AB menu
• Measured standard link A: the standard measured by the display unit on link A.
• Identifier packet link A: the packet with standard information identified by the
display unit on link A.
• Measured standard link B: the standard measured by the display unit on link B.
• Identifier packet link B: the packet with standard information identified by the
display unit on link B.
To display the video information on the screen, the display unit gives priority to the
standard it detects by analyzing the input signal. If the identifier packet does not
correspond to the measured standard, or if the video signal is not displayed properly due
to a wrong measurement of the standard, it is possible to force the display unit to show
the video signal according to manual settings by checking the "Override signal detection"
option.
automatic detection of the input signal
input signal is set manual: override signal detection is checked
• Override signal detection: when checked, the display unit will ignore the mea-
sured standard and will display the video signal according to the manual settings.
• Encoding: sets the encoding of the video signal. This can be RGB or YCbCr.
• Chroma sampling: sets the sampling of the video signal. Possible sampling options
are: 4:2:2, 4:4:4 and 4:4:4:4.
• Bit depth: sets the bit depth of the video signal. Possible settings are: 8, 10 or 12.
• Video framing: sets the video framing of the video signal: Possible options are:
Interlaced, Progressive or Segmented.
• Swap channels: when checked, the input channels are swapped, i.e. channel A
becomes B and vice versa.
Barco - RHDM-2301 - User manual ____________________________________________________ 77
Full functionality description