Configuring Dcbx - HP 5820X series Configuration Manual

Hide thumbs Also See for 5820X series:
Table of Contents

Advertisement

To do...
2.
Enable CDP compatibility
globally
3.
Enter
Ethernet
interface
view or
port
group
view
4.
Configure CDP-compatible
LLDP to operate in TxRx mode
The maximum TTL value allowed by CDP is 255 seconds. To make CDP-compatible LLDP work properly
with Cisco IP phones, make sure that the product of the TTL multiplier and the LLDPDU transmit interval is
less than 255 seconds.

Configuring DCBX

DCE, also known as CEE, is enhancement and expansion of traditional Ethernet local area networks for
use in data centers. DCE uses the DCBX to negotiate and remotely configure the bridge capability of
network elements.
DCBX has two self-adaptable versions, DCB Capability Exchange Protocol Specification Rev 1.0 and DCB
Capability Exchange Protocol Base Specification Rev 1.01. DCBX offers the following functions:
Discovers the peer devices' capabilities and determines whether devices at both ends support these
capabilities.
Detects configuration errors on peer devices.
Remotely configures the peer device, if the peer device accepts the configuration.
DCBX is supported only on the 10-GE ports of HP 5820X series Ethernet switches, and only the remote
configuration function is supported.
Figure 69 DCBX application scenario
DCBX enables lossless packet transmission on DCE networks.
As shown in
switch. DCBX enables the switch to control the server adapter, and simplifies the configuration and
guarantees configuration consistency. DCBX extends LLDP by using the IEEE 802.1 organizationally
specific TLVs (DCBX TLVs) to transmit DCBX data, including PFC, ETS, and APP
Use the command...
lldp compliance cdp
Enter Layer
2/Layer 3
interface interface-type interface-number
Ethernet interface
view
Enter port group
port-group manual port-group-name
view
lldp compliance admin-status cdp txrx
Figure
69, DCBX applies to a FCoE based data center network, and operates on an access
211
Remarks
Required.
Disabled by default.
Required.
Use either command.
Required.
Disable mode by default

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5800 series

Table of Contents