Table of Contents
Advertisement
CyberDome Series Installation Manual
A06-8SG0/B/April2006/1033921C
APPENDIX A: ACCESSORY INSTALLATION
KTA-25/KTA-25W Corner Adapter
The KTA-25/KTA-25W Corner-mount Bracket (formerly KTA-06-12) is used to mount a
KTA-02-12W Wall-mount Bracket or KTA-20/KTA-20T CyberMount to the corner of a building.
See Figure 53.
CAUTION!
For safety, the hardware and procedure used for securing the KTA-25/25W must allow it to support
a minimum of a 35 lb (15.88 kg) load.
Step 1)
Place the adapter on the corner
of the building and mark the lo-
cation of the four mounting holes.
See Figure 53.
Step 2)
Prepare the four mounting holes
in accordance with the type of
wall (e.g., concrete, wood) and
fasteners used.
Step 3)
Secure the adapter to the wall
with the appropriate fasteners.
Step 4)
Attach the KTA-02-12W Wall
Bracket to the adapter using the
hardware provided.
KTA-26/KTA-26W Pole Adapter
The KTA-26/KTA-26W Pole-mount Bracket (formerly KTA-07-12) is used to adapt a KTA-02-12W
Wall-mount Bracket or KTA-20/KTA-20T CyberMount to a pole. The bracket can be bolted to
the pole or secured with adjustable stainless-steel bands. See Figure 54.
CAUTION!
For safety, the hardware and procedure used for securing the KTA-26/26W must allow it to support
a minimum of a 35 lb (15.88 kg) load.
Figure 54: Pole Adapter Installation
Appendix A: Accessory Installation
Figure 53: Corner Adapter Installation
37
Advertisement
Table of Contents
