Table of Contents
Advertisement
PTZ and Dome Installation
34
Installing the Dome Assembly
The CyberDome comes with one of four acrylic dome assembly options: clear, tinted, smoked,
chrome mirrored and gold mirrored domes. Each dome assembly attaches to the upper
housing with interlocking clips and a dome safety cable.
CAUTION!
DO NOT touch the acrylic when handling the dome assembly. Use a scratch-resistant cloth.
To attach the dome assembly to flush- and pendant-mount housings:
Step 1)
Fasten the dome safety cable to the upper housing with the safety clip. See
Figure 52.
Step 2)
Position the dome such that the angled ends of its mounting clips face the angled
ends of the clips attached to the upper housing.
Step 3)
Turn the acrylic dome clockwise, so that the ends of the mounting clips engage
and lock into place.
Figure 52: Attaching the Dome Assembly to the Upper Housing
CyberDome Series Installation Manual
A06-8SG0/B/April2006/1033921C
Advertisement
Table of Contents
