Table of Contents
Advertisement
CyberDome Series Installation Manual
A06-8SG0/B/April2006/1033921C
Method 2: Swing Mount Installation
The KTA-21/KTA-21W Swing Mount suspends a CyberDome from its swinging reach arm,
which is mounted to a rooftop parapet by a mounting bracket. It allows the CyberDome to
swing out from a building for increased and versatile coverage, and swing in for easy servicing.
It provides the path for the video, 24VAC, and RS422 data control cables.
To install the 7-inch pendant housing with the Swing Mount, proceed with the following steps.
CAUTION!
DO NOT provide power to the housing until all installation steps are complete.
Step 1)
Remove the junction box from the mounting plate. See Figure 29 below.
Figure 29. KTA-21 Assembly Hardware
Housing Installation
21
Advertisement
Table of Contents
