Table of Contents
Advertisement
CyberDome Series Installation Manual
A06-8SG0/B/April2006/1033921C
Step 7)
Feed the end of the cable assembly coming out of the mounting socket through
the nipple on the top of the junction box. See Figure 33.
Feed the video cable BNC connector through the nipple first, and then the twisted-
pair bundle.
Step 8)
Remount the junction box onto the mounting plate using the hardware provided.
See Figure 34.
Figure 33. Cable Assembly into the Chase Nipple
Step 9)
Place the sealing gasket on the inside of the junction box cover, and then make
the cable assembly connections to the terminal strip. See Figure 35.
Figure 35. Cable Assembly Connections in the Junction Box
Step 10)
WITH POWER OFF, make the facilities connections to the terminal strip on the
inside of the junction box cover. See Figure 35.
Step 11)
Install the junction box cover. Ensure that the sealing gasket is properly posi-
tioned.
Housing Installation
Figure 34. Remounting the Junction Box
23
Advertisement
Table of Contents
