Ricoh A229 Service Manual page 213

LCT (A698)
15. Connect the connectors.
• Between the copier and the LCT (2 connectors).
• Between the LCT and the LCT feed unit (2 connectors).
16. Secure the protective earth wire [A] to the copier (1 screw – M4 x 6).
17. Attach the rear upper cover [B] (2 screws).
18. Attach the LCT cover [C] (1 screw).
19. Plug in the copier and check the machine's operation.
NOTE: The copier automatically recognizes that the LCT has been installed.
A229
[A]
[C]
3-26
A698I511.WMF
[B]
A698I512.WMF
SM