Ricoh A229 Service Manual page 197

COPIER (A229)
[B]
21. Set the toner bottle holder in position (1 screw [A]) and attach the shutter inner
cover [B] (1 screw).
NOTE: When attaching the shutter cover, make sure that the pin [C] in the
shutter engages the stopper [D].
22. Install a toner bottle by following the instructions on the decal.
23. Attach the three plastic mylar strips [E] to the back of the original exit tray [F].
NOTE: 1) The small mylar strip should be in the middle.
2) The mylar strips must be attached to the tray side [G] first, then to
the base copier side [H].
A229
[A] [D]
A229I160.WMF
[H]
[H]
3-10
[C]
[G]
[G]
A229I153.WMF
[F]
[E]
SM