[C]
1. Remove the spring [A].
2. Remove the wire [B].
3. Wind the end of the new wire with no marking around the tray lift drive pulley
[C] in the correct direction, as shown. (
4. Route the wire, with the ball, as shown (
5. Wind the end of wire with marking around the tray lift drive pulley in the correct
direction, as shown (
6. Put the spring back on the wire tension bracket.
7. Wind the new tray lift wire for the other side as well.
SM
[B]
[A]
[C]
).
5-69
A229R679.WMF
).
,
,
,
,
,
, and
PAPER FEED
).
A229