Ricoh A229 Service Manual page 216

[D]
[B]
[A]
2. Remove the four plastic caps [A] from the copier's left cover.
3. Remove the connector cover [B].
4. Install the front joint bracket [C] and rear joint bracket [D] (2 screws – M4 x 14
each).
5. Peel off the backing of the double-sided tape that is attached to the lower
grounding plate [E].
6. Attach the lower grounding plate to the bottom edge of the paper tray unit as
shown.
SM
[E]
3-29
3,000-SHEET FINISHER (A697)
[C]
A697I502.WMF
A229