Ricoh A229 Service Manual page 212

[A]
11. Hold the upper stay [A] of the LCT and place the LCT on the bottom plates [B]
of the LCT connector.


CAUTION
Place the LCT on the bottom plates [B] of the LCT connector properly (the
sides of the LCT and the copier must be parallel).
12. Insert the two pins [C] on the LCT connector into the two holes in the LCT.
13. Secure the LCT to the LCT connector (3 screws).
14. Put the cap [D] in the front screw access hole.
SM
[C]
[B]
A698I509.WMF
[D]
3-25
LCT (A698)
A698I510.WMF
A229