Ricoh A229 Service Manual page 582

Rev. 3/99
Mode No.
(Class 1 , 2 & & & & 3)
6-105 Stapling Position Adjustment
6-113 Punch Hole
1 2-Holes
2 3-Holes
6-801 Communications Test
⇒
6-901 Original None Wait Time
⇒
6-901-1 Normal Original
⇒
6-901-2 Thin Original
SM
Function
* Adjusts the stapling position in the main
scan direction
Use the "•" key to toggle from + to - and
Clear/Stop key to toggle from - to + before
entering the value..
Adjusts the punch hole position in the sub-
scan direction for the punch unit with two
punch holes.
Use the "•" key to toggle from + to - and
Clear/Stop key to toggle from - to + before
entering the value.
Adjusts the punch hole position in the sub-
scan direction for the punch unit with three
punch holes.
Use the "•" key to toggle from + to - and
Clear/Stop key to toggle from - to + before
entering the value.
Makes a communication test between the
main and sub unit
Adjust the interval between the original in
normal original mode.
Adjust the interval between the original in
thin original mode.
4-39
SERVICE PROGRAM MODE
Settings
- 1~ +3.5
0.5 mm/step
+0.0 mm
- 7.5 ~ + 7.5
0.5 mm/step
0 mm
- 7.5 ~ + 7.5
0.5 mm/step
0 mm
Start
500ms~700ms
10mm/step
620ms
500ms~700ms
10mm/step
520ms
A229