Ricoh A229 Service Manual page 449

SERVICE CALL CONDITIONS
SC959: Printer setting ID error
-Definition- [B']
The ID that is required for image processing using the printer is not sent from
the IPU.
- Possible causes -
• Software defective
SC960: Printer return ID error
-Definition- [B']
The ID that is sent from the printer controller after finishing the printout is
incorrect.
- Possible causes -
• Software defective
SC961: Printer ready ID error
-Definition- [B']
The ID that is sent from the printer controller in the printer controller printing
ready condition is incorrect.
- Possible causes -
• Software defective
SC962: Memory setting ID error
-Definition- [B']
The ID that is sent from the memory when the IPU sent the memory ready signal
is incorrect.
- Possible causes -
• Software defective
SC963: Memory finishing ID error
-Definition- [B']
The ID that is sent from the memory when the IPU sent the memory finish signal
is incorrect.
- Possible causes -
• Software defective
A229 6-26 SM