Ricoh A229 Service Manual page 264

Mode No.
(Class 1 , 2 & & & & 3)
5-504 Jam Alarm Level(RSS function)
2 Jam Auto Call
(RSS function)
5-505 Error Alarm Level
5-507 Paper Supply Call Level
128 Others
132 A3
133 A4
134 A5
141 B4
142 B5
160 DLT
164 LG
166 LT
172 HLT
5-590 Auto Call Setting
1 Original Count
2 Door Open
3 Paper Supply
4 Stapler Supply
5 Toner Supply
5-801 Memory All Clear
SM
Function
* Japanese version only.
Do not change the values.
* Japanese version only.
Do not change the values.
* Japanese version only.
* Do not change the values.
*
*
*
*
*
*
*
*
* Japanese version only.
* Do not change the values.
*
*
*
Resets all correction data for process
control and all software counters. Also,
returns all modes and adjustments to the
default settings.
See the "Memory All Clear" section for how
to use this SP mode correctly.
Touch "Start" for over 3 seconds, then turn
the main power switch off and on.
Normally, this SP mode should not be
used.
It is used only after replacing the NVRAM,
or when the copier malfunctions due to a
damaged NVRAM.
The LCD coordinates are also cleared, see
"LCD Touch Panel Calibration".
4-35
SERVICE PROGRAM MODE
Settings
0: Off
1: On
0 ~ 255
100
copies/step
250 ~ 10000
1 page/step
1000 pages
0: Off
1: On
Start
A229