Table of Contents
Advertisement
DETAILED DESCRIPTIONS
2.1.3 OPERATION IN IRREGULAR CONDITIONS
Paper end during copying
When a machine enters the paper end condition, it stops and "add paper" is
displayed. The other machine continues to make copies. The rest of the copy job is
transferred to this machine.
If paper is replenished before the end of the job, the machine will automatically
start. If the machine was part of the way through a set of copies, it will finish that
set first. Then, if there are any sets still remaining, they will be re-allocated to both
machines.
Copy tray full
When copy tray is full, the machine stops and "paper is full" is displayed. If this
occurs on the slave unit, it is displayed on the master unit also. The other machine
continues with the rest of the job.
If the copies are removed from the copy tray before the end of the job, the machine
will automatically start. If the machine was part of the way through a set of copies,
it will finish that set first. Then, if there are any sets still remaining, they will be re-
allocated to both machines.
Paper jam
When a paper jam occurs, the following indicators are displayed.
1) "Paper jam" is displayed on the master unit.
2) The machine having the jam condition is indicated on the master unit.
3) The jam position is displayed on the machine which has the paper jam.
When a machine has a paper jam, it stops and the above indicators are displayed.
The other machine continues with the rest of the job.
If the jam is removed before the end of the job, the machine will automatically start.
If the machine was part of the way through a set of copies, it will finish that set first.
Then, if there are any sets still remaining, they will be re-allocated to both
machines.
A229
9-8
SM
Advertisement
Table of Contents
Troubleshooting
