Ricoh A229 Service Manual page 415

COPY IMAGE ADJUSTMENTS: PRINTING/SCANNING
Mechanical Adjustment
- Side-to-side Positioning Adjustment (Tandem Tray and Built-in LCT) -
When the tray is put in the paper feed unit, the side-to-side positioning plate [C]
presses the feed tray against the rubber stopper on the frame of the paper tray
unit. By moving the positioning plate, the tray position can be changed to adjust the
side-to-side registration.
NOTE: Do this mechanical adjustment only if the side-to-side registration cannot
be adjusted to within standard using SP mode. In such a case, do the
mechanical adjustment first, then adjust with the SP mode.
- Side-to-side Positioning (Except for the Tandem Tray and Built-in LCT) -
Side plates [A] are fixed to the positioning plate [B]. By moving the positioning plate
(fixed with four screws), the paper position can be changed to adjust the side-to-
side registration.
NOTE: Do this mechanical adjustment only if the side-to-side registration cannot
be adjusted to within standard using SP mode. In such a case, do the
mechanical adjustment first, then adjust with the SP mode.
A229
[C]
[A]
[C]
5-104
A229D619.WMF
[A]
A229D620.WMF
SM