Ricoh A229 Service Manual page 369

TRANSFER BELT UNIT
[D]
[A]
[B]
[H]
5. Turn the belt drive roller holder [A] clockwise (front view) and remove the bias
terminal [B] (1 screw).
6. Replace the transfer belt [C].
NOTE: 1) Before installing the transfer belt, clean both sides of the transfer
belt with a dry cloth (do not use alcohol).
2) Before installing the transfer belt, clean the following items with
alcohol.
• Belt drive roller [D]
• Belt roller [E]
• Bias roller [F]
3) Position the transfer belt at the center of the belt roller [E]. (Both
marks [H] should be visible.)
4) Set the transfer belt under the bias terminals [B] and [I].
A229
[C]
A229R525.WMF
A229R524.WMF
5-58
[E]
[F]
[H]
[I]
A229R523.PCX
SM