Ricoh A229 Service Manual page 195

COPIER (A229)
12. Disconnect two connectors [A].
13. Pull out the development unit [B] as shown.
NOTE: 1) To prevent scratches on the drum, push the development unit to the
right while pulling it out.
2) When pulling out the development unit, do not pull the knob [C].
3) Place the development unit on a clean sheet of paper [D], to prevent
foreign matter from being attracted to the sleeve rollers.
14. Remove two screws [E] that hold the toner hopper [F].
15. Remove the toner hopper by lifting it out.
A229
[B]
[C]
[A]
A229I501.WMF
3-8
[E]
[F]
A229I529.WMF
[D]
SM