Ricoh A229 Service Manual page 204

[B]
[C]
4. Re-install both side fences [A] in the appropriate position for the required paper
size, as shown.
NOTE: The position of the side fence holders [B] and the pins [C] on the rack
gear is different for each paper size (from the outside pin: A4, 11", B5).
5. Change the position of the front and rear side fences [D] (2 screws each) and
end fence [E] (2 screws) on the left tandem tray to match the required paper
size.
6. Enter System Settings in User Tools, and select the paper size that you just set
the fences up for.
SM
[A]
A229I510.WMF
[E]
[A]
3-17
PAPER SIZE CHANGE
[D]
A229I511.WMF
A229