Figure 67: Region Configuration Options - FLIR CM-6206-H1-I User And Installation Manual

Note:
If you are using Latitude, it is recommended to set the motion detection from Admin Center.
To activate Motion Detection
1. From the Motion Detection dropdown list, select a number from 1 to 4.
2. Do one of the following for each detection region:

Select On for continuous detection.

Select By schedule for scheduled detection. For instructions how to set a schedule for
motion detection, refer to
3. Create a Motion Detection region. See instructions below.
4. Paint the Motion Detection region. See instructions below.
5. Configure the Motion Detection settings. See instructions below.
6. Set triggered actions. See instructions below.
To create a Motion Detection region
1. Click Edit. The Region Configuration editing options are displayed.
2. Click Add. A motion detection region is created on-screen.
3. To change the size of the region, drag an edge of the box to the desired cell.
4. Click SAVE.
September 29, 2016
Schedule.

Figure 67: Region Configuration Options

CM-6206-H1-I User and Installation Guide
Configuration and Operation
79