FLIR CM-6206-H1-I User And Installation Manual page 45

Quad-View
Click this button to view the image as
split into four tiles according to the
selected view mode (Full-Window or
Half-Window). Scroll your mouse wheel
over a tile to zoom in or out. The icon is
blue when selected.
Snapshot
Click this button to automatically save the JPEG snapshots in the specified location. The default
location to save snapshots is: C:\.To change the storage location, refer to
Record/Pause
Pressing the Recording button stores recordings from the Live View in the location specified on
the local hard drive, which can be configured in the File Location screen. The default storage
location for the web recording is: C:/. Refer to
Video Streaming
Restart/Stop
Press the Stop button to disable video streaming and to display the live video as black. Press
Restart to show the live video again.
Mic
The Microphone button allows the local site to talk to the remote site. Click the button to switch it
on/off. This function is available only to a user who has been granted this privilege by the
Administrator. Refer to
Manual Trigger
This button enables you to trigger an action defined on the System > Events Setup > IO screen,
which enables control over input and output alarms.
Speaker
Click the Speaker button to mute/activate the audio. This function is available only to a user who
has been granted this privilege by the Administrator. Refer to
further details.
September 29, 2016
User in the Security section for further details.
CM-6206-H1-I User and Installation Guide
File Location for details.
User in the Security section for
Configuration and Operation
File Location.
37