Audio - FLIR CM-6206-H1-I User And Installation Manual

Configuration and Operation

Audio

From the Audio screen you can select the Transmission Mode, Server Gain, Bit Rate, and enable or
disable storage of the audio recording.
Transmission Mode

Full-duplex (Talk and listen simultaneously) – In the Full-duplex mode, the local and remote sites
can communicate with each other simultaneously, i.e. both sites can speak and be heard at the
same time.

Half-duplex (Talk or listen, not at the same time) – In the Half-duplex mode, the local or remote
site can only talk or listen to the other site at one time.

Simplex (Talk only) – In the Talk only Simplex mode, the local/remote site can only talk to the
other site.

Simplex (Listen only) – In the Listen only Simplex mode, the local/remote site can only listen to
the other site.

Disable – Select this option to turn off the audio transmission function.
Server Gain Setting
Set the audio input/output gain levels for sound amplification. The audio input gain is adjustable from 1
to 10. The audio output gain is adjustable from 1-6. The sound will be turned off if the audio gain is set to
Mute. The default audio input and output gain setting is 3.
108
Figure 92: Audio Screen
CM-6206-H1-I User and Installation Guide September 29, 2016