Software Upgrade - FLIR CM-6206-H1-I User And Installation Manual

Software Upgrade

The Software Upgrade screen enables you to select a software file to upload.
Note:
1. Make sure that the software upgrade file is available before performing a software upgrade.
2. Do not change the file name. If you change the upgrade file name, the system will fail to find the
file.
Warning:
1. Do not unplug power while entering file names.
2. Do not unplug power or change the screen while upgrading software.
Avertissement:
1. Ne débranchez pas l'alimentation pendant la modification des noms de fichiers.
2. Ne débranchez pas l'alimentation pendant la mise à niveau du logiciel.
To upgrade the software
1. In the Step 1 text box, click Browse and select the binary file to be uploaded, for example,
uImage+userland.img.
Note:
Do not change the file name. If you change the upgrade file name, the system will fail to find
the file.
2. From the drop-down menu of binary files in Step 2, select the file to upgrade. In the above
example uImage+userland.img is selected.
September 29, 2016
Figure 77: Software Upgrade Screen
CM-6206-H1-I User and Installation Guide
Configuration and Operation
89