FLIR CM-6206-H1-I User And Installation Manual page 104

Configuration and Operation
Stream 1
3072 x 2048 (20 fps)
3072 x 2048 (30 fps)
1920 x 1080 (30 fps)
1280 x 720 (30 fps)
720 x 480 (30 fps)
Note:
Latitude does not accept settings above 25 fps when operating on a PAL system or above 30 fps
when operating in an NTSC system.
Video Resolution Settings with Camera Dewarping
The default resolution setting is H.264 @ 2048x2048 + Full HD 1080p (20 fps). The following video
resolutions are supported:

H.264-Only

MJPEG-Only

H.264 + H.264

H.264 + MJPEG
Note:
Images can be sent by FTP or email only when MJPEG steaming is selected as one of the
streams.
96
H.264 + H.264 + H.264 + H.264/MJPEG (NTSC)
Stream 2
1920 x 1080 (20 fps)
1280 x 720 (20 fps)
720 x 480 (30 fps)
1280 x 720 (30 fps)
720 x 480 (30 fps)
1280 x 720 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
CM-6206-H1-I User and Installation Guide
Stream 3
1280 x 720 (20 fps)
720 x 480 (20 fps)
1280 x 720 (20 fps)
720 x 480 (20 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
1280 x 720 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
Stream 4
720 x 480 (20 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
720 x 480 (30 fps)
September 29, 2016