Table of Contents
Advertisement
Section 3: Installing the 7.2V Ni-MH Battery Packs
Carefully remove the hatch from the hull.
The Pro Boat water-cooled ESC comes
pre-wired with a Deans-style connector.
Use a 6-cell battery pack listed below for
optimum performance.
• PRB3313 7.2V 3600mAh
w/Deans Connector
• PRB3314 7.2V 4200mAh
w/Deans Connectors
You may also remove the Tamiya-style
connector from conventional battery packs
and purchase WSD1303 from
your local hobby shop. Be sure to
solder the connectors to the battery
in the proper polarity.
Pro Boat offers a charge adapter (PRB3312)
to allow you to charge the PRB3313 and
PRB3314 batteries with Deans connectors
with conventional chargers that use Tamiya-
style connectors.
Follow the instructions included with your fast
charger to ensure a safe charge.
Attach the hook and loop material to the
batteries and the battery boxes.
Confirm that the switch inside the boat is in
the "OFF" position. Install two fully charged
7.2V Ni-MH battery packs into the hull.
5
Advertisement
Table of Contents
