Table of Contents
Advertisement
EN
Box Contents
• ProBoat ® Jet Jam™ 12-Inch RTR Pool Racer
• Horizon 2.4GHz Transmitter (HRZ00020)
• Horizon ESC/Receiver (HRZ00017)
• Horizon Servo (HRZ00009)
• Dynamite ® 7.4 1500 mAh 2S 15C Li-Ion Battery (DYNB0110)
• ProBoat USB Charger (PRB18019)
Recommended Tools and Materials
• Needle nose pliers
• Paper towel
• Rubbing alcohol
• Phillips screwdriver: #1, #2
• Hex drivers: 1.5mm and 2mm
• Clear tape (DYNM0102)
®
• ProBoat
Marine Grease and Gun (DYNE4200)
Placing the Decals
1
Installing the Battery Pack
1. Remove the canopy from the hull by rotating the
canopy latch to the left or right and pulling up on
the back of the canopy.
4
4
2
3
5
4
6
7
2. Install the fully charged battery in the compartment
by securing it into the battery cradle with the battery
cable toward the front of the boat.
3. Connect the battery to the ESC/Receiver.
1
5
2
3
7
6
Jet Jam
Advertisement
Table of Contents
