Section 1: Assembling the Boat Stand
Attach the side stand pieces by interlocking
them into the end pieces as shown. Secure
the interlocking pieces with medium CA or
epoxy. Make certain you allow the adhesive
to fully cure before placing your boat on
the stand.
Section 2: Installing the Transmitter Batteries
Install 8 fully charged AA alkaline batteries
into the transmitter, following the
instructions provided for your radio system.
Be sure to install the batteries with respect
to proper polarity.
Contents
4 4
• Miss Elam Brushless EP RTR
• Pro Boat radio transmitter
• Boat stand