Instrument Start - Ecom EN2 Operating Instructions Manual

Card insert
Insert the multi-media card as shown.
Take care that the card does not stand
out and that it well hooks on.
Never pull out cards during
data record - data loss and

6. Instrument Start

Once the instrument is switched on (key
<I/0>), the main menu is displayed.
6 sub-menus with the following functions
(non-visible sub-menus can be called up
while scrolling with the cursor keys) are
displayed:
Page 8
damaging of the data
carrier possible!
Always position the probe in the exhaust pipe
once the calibration phase is over!
Always use a filtering system as per our
recommendation for combustion plants
firing solid combustibles!
Gas analysis
Soot..Oil trace
Data processing
Adjustments
Control
Diagnostics
ecom-EN2