Ecom EN2 Operating Instructions Manual page 26

Printout (selection after pressing <Enter>):
- Text input for printout on measurement protocol (8 x 24 characters)
- Input the text of line 1 as follows:
1. Activate character selection list with <F4>.
2. Select keyboard type with <F3> (4 different keyboards available).
3. Use the cursor keys to select the desired character
(selected character is outlined by black background).
4. Confirm selection while pressing <Enter>.
5. Repeat procedure until desired text is complete.
6. Once input for line 1 is completed, deactivate the characters selection
mode with <F4> and move to the second line with the cursor
key <Down>.
7. Once all lines have been processed as desired, exit the menu
with <ESC>.
Page 26 ecom-EN2