Closing A Project And Saving Data - Siemens SINAMICS G120 Manual

Closing a project and saving data

Unintentional disruption of the online connection between the inverter and the PC due to a
power outage, for example, leads to the loss of the parameter settings. As a result, STARTER
offers various possibilities for protecting your parameter settings.
1 Double-click the "Drive Navigator" in the project tree.
2 Select "Commissioning" in the workbench area.
3 Save the parameter settings in the inverter's EEPROM memory by selecting "Save data in drive (RAM to ROM)."
4 AND save the parameter setting in your project by clicking "Save data to project."
1
4
2
3
Now you can disconnect the
online connection to the
inverter by clicking the "Discon-
nect from target system" icon.
In our example, please continue
to remain online to restore the
inverter to its factory settings.
Note