Siemens SINAMICS G120 Manual page 21

Mounting the IOP or BOP-2 in a cabinet door
The operator panels can easily be mounted in a control cabinet door with just a few manual
operations using the optionally available door mounting kit. Degree of protection IP55 / UL
type 12 is achieved when mounting them in the control cabinet door.
4
Congratulations! Your inverter is now ready for operation.
After assembly is completed, the inverter's parameters must be set up, in other words, you must give
the inverter the specific characteristics of the attached motor.
1
3
5
Identical mounting for BOP-2
2
1 Door panel
2 Seal
3 Door mounting bracket
4 Screws
5
D-type retaining screws
15