Siemens SINAMICS G120 Manual page 43

Getting information on active faults
• Use the wheel to highlight the word MENU.
• Confirm by pressing OK.
• Choose DIAGNOSTICS.
• Confirm by pressing OK.
• Select ACTIVE FAULTS / ALARMS.
Menu
OK
OK
Active Faults/Alarms
OK
Now all active fault messages that have not yet been acknowledged are displayed.
To get further information you can highlight each one and press INFO.
You now know how to use the Operator Panels to set the parameters on your inverter and start it
up. A further possibility is setting up the parameters using your PC or a SIMATIC programming
device. This method is clearer and more convenient, but requires somewhat more preparation
time.
Diagnostics
OK
OK
OK
If you want to find out about
previous faults and alarms, please
navigate back one level and select
"History." This will display a list of all
previous faults and alarms including
the time they occurred.
Note