Pc Preparation - Siemens SINAMICS G120 Manual

PC preparation

To connect the STARTER tool to the inverter you need to make sure that the USB-COM emulation
connects to a COM port smaller than eight (COM1 ... COM7). You need to remember that number
for later use with the STARTER.
1 1 Browse to your computer's control panel.
2 2 Select "Hardware."
3 3 Click on "Device Manager."
4 4
Check if "Sinamics G120 USB COM Emulation" has an address higher than COM7.
STARTER software and PC:
42
1
2
3
Mounting and preparation
4