Define Dial Pattern - Avaya 9600 Series Configuring

4.7.

Define Dial Pattern

This section describes the steps to define a dial pattern to route calls to non-SIP stations on
Communication Manager. In the sample configuration, 5-digit extensions beginning with
"51xxx" are assigned to IP (H.323) and digital stations managed by Communication Manager.
Note: Since the SIP users are registered to Session Manager, a dial pattern does not need to be
defined for SIP stations supported by Communication Manager Evolution Server.
To define a dial pattern, expand Elements  Routing and select Dial Patterns.
Click New (not shown). In the
for remaining fields.
 Pattern:
 Min:
 Max:
 SIP Domain: Select the SIP Domain from drop-down menu or select "ALL" if
 Notes:
In the Originating Locations and Routing Policies
The Originating Locations and Routing Policy List page opens (not shown).
 In Originating Locations table, select "ALL" .
 In Routing Policies table, select the appropriate Routing Policy defined for
Communication Manager Evolution Server in Section 4.6.
 Click Select to save these changes and return to Dial Patterns Details page.
Click Commit to save the new definition. The following screen shows the Dial Pattern
defined for routing calls to Communication Manager Evolution Server.
DJH Reviewed:
SPOC 07/08/2011
General section, enter the following values and use default values
Enter dial pattern for extension numbers of non-SIP stations.
Enter the minimum number digits that must be dialed.
Enter the maximum number digits that may be dialed.
Session Manager should accept incoming calls from all SIP domains.
Enter a brief description. [Optional].
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
section, click Add.
28 of 51
SM6-1_CMES