Avaya 9600 Series Configuring page 32

Step 2: Select Communication Profile tab on New User Profile page and enter value used to
log in endpoint in the Communication Profile Password and Confirm Password fields.
Note: Communication Profile Password should match the Security Code field defined in
Section 3.11.
Verify there is a default entry identified as the Primary profile as shown below:
If an entry does not exist, select New and enter values for the following required attributes:
 Name:
 Default:
Step 3: Expand Communication Address
Communication Address for the new user. Enter values for the following required attributes:
 Type:
 Fully Qualified
Address:
 Domain:
Click Add (not shown) to save the Communication Address. The screen below shows results
from Step 3:
DJH Reviewed:
SPOC 07/08/2011
Enter "Primary".
Verify has been entered.
sub-section and select New to define a
Select "Avaya SIP" from drop-down menu.
Enter same extension number as used for Login Name in Step 1.
Note: value is shown in Handle field after address is added.
Verify value matches Domain name defined in Section 4.1.
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
32 of 51
SM6-1_CMES