Avaya 9600 Series Configuring page 37

Using the up and down arrows, select the appropriate fields from the Address Procedures menu
to specify settings for the specific network configuration and press Change to edit each field.
To manually configure the telephone, select "No" for Use DHCP field and enter appropriate IP
addresses for Phone, Router, Mask, HTTPS File Server and HTTP File Server fields.
The screen below shows the configuration of these fields in the sample configuration.
Note: IP addresses have been partially hidden for security.
Continue scrolling down to see the fields for DNS Server, 802.1Q, VLAN ID, and VLAN Test.
Enter appropriate values for each field for the specific network configuration.
Once all fields in this section have been entered, press Save (not shown) to save the new values
and return to the main Admin Procedures menu.
DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
37 of 51
SM6-1_CMES