Avaya 9600 Series Configuring page 19

On Page 4, add the desired number of call-appr entries in the BUTTON ASSIGNMENTS
section. This governs how many concurrent calls can be supported. In the sample configuration,
three call appearances were configured to support transfer and conferencing scenarios.
Note: Avaya 9601 IP Deskphones display only two local call appearance buttons when idle. So
the number of entries shown below is not required to match the number of appearances displayed
on the telephone.
add station 50655
SITE DATA
...
BUTTON ASSIGNMENTS
1: call-appr
2: call-appr
3: call-appr
4:
On Page 6, enter the following values and use defaults for remaining fields.
 SIP Trunk:
add station 50655
SIP FEATURE OPTIONS
Type of 3PCC Enabled: None
DJH Reviewed:
SPOC 07/08/2011
STATION
Enter "aar" to use Route Pattern defined in Section 3.7 so
calls will be routed over the secondary route in case the primary
Session Manager is not available.
STATION
SIP Trunk: aar
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
Page
5:
6:
7:
8:
4 of 6
Page 6 of 6
19 of 51
SM6-1_CMES