Avaya 9600 Series Configuring page 40

Hide thumbs Also See for 9600 Series:

Table of Contents

Step 4: On the SIP Settings menu, highlight SIP Proxy Settings (not shown) and press Select.

Select NEW (not shown).

Enter the following information for the primary Session Manager.

 SIP Proxy Server:

 Transport Type:

 SIP Port:

The screen below shows the results from Step 4 for the sample configuration.

Step 5: Press Save. Repeat the above step to enter the information for the second Session

Manager.

Step 6: Press Save to save the information for the second Session Manager. Press Back two

times to return to the main Admin Procedures menu.

Step 7: Press Exit to complete the configuration. The phone will reboot.

DJH Reviewed:

SPOC 07/08/2011

Enter IP Address of SIP signaling interface for Session Manager.

Select "TCP".

Enter "5060".

Solution & Interoperability Test Lab Application Notes

40 of 51

SM6-1_CMES

Table of Contents